Armstrong furnace draft inducer motor

 

The Armstrong furnace draft inducer motor is a piece of equipment used to control the draft from a furnace. It produces the necessary amount of draft for combustion, without causing any airflow disruption.

The armstrong furnace draft inducer motor uses a combination of AC and DC motors to maintain the required level of the draft while reducing power consumption up to 50%.

The armstrong furnace draft inducer motor, also known as the PWM fan motor, is a type of blower forward-reverse motor that uses pulse width modulation to control its operation.

The armstrong furnace draft inducer motor may be used in a variety of applications due to its availability, cost-effectiveness, and performance.

Even though the armstrong furnace draft inducer motor is common across most sectors and industries, it is not well-known to the general public.

Armstrong furnace draft inducer motor is a very important part of the furnace, which moves in a linear direction and transfers the combustion gases from one chamber to another.

Armstrong Furnace Draft Inducer Motor has been used for more than 100 years. It has also been widely used in industrial applications including oil refineries, chemical plants, power stations and coal-fired power plants. It is high capacity and ruggedly built, making it an efficient choice for long-term use.

The draft inducer motor can be found on the front face of an armstrong furnace. The Armstrong furnaces are typically located at large industrial facilities that deal with combustible fuels like coal or natural gas to provide the heat needed to heat buildings.