bosch furnace error 92
However, there are many things that can go wrong with Bosch furnaces. One common error code is 92, which means that the furnace has been shut down according to its automatic system because there was a potential problem detected in the unit.
Some people might not notice this error code until they try to turn on their heat and realize it doesn’t work or they smell a burning smell from the family room possibly coming from their furnace. This article will talk about the meaning of this error code and how you can fix it so you don’t have to wait for a technician to come to install your new furnace before winter starts setting in.
The following is an example of a bosch furnace error code 92.
Bosch furnaces have an “error 92” code when the blower motor fails.
If the error code 92 is showing, then the blower has failed to start up. The most common reason for this is a low voltage power supply, which can be caused by bad wiring or a tripped circuit breaker.
—
bosch furnace error 92 is a common error code that many people encounter when using this specific type of heating system. But what does it mean and what are the possible solutions?
The problems associated with both furnace error code 92 can be solved by troubleshooting the problem.
This error code is usually seen as an indicator of a problem with the gas valve. Most of the time, this is caused by the furnace sensing that there has been an obstruction in the gas line. This might be caused by a blockage in the vent pipe or even just carbon build-up on the solenoid valve itself.
Bosch’s error code 92 is most likely a sensor issue. If there is a power outage, the furnace will automatically turn itself off.
An error code 92 typically means that there is still electricity going to the furnace but there is no sensor information coming back to the computer. This may happen when there has been a power outage and the thermostat has reset itself, or if there has been an electrical surge in your home.
“Inspections, Installations, Repairs & Maintenance”