Furnace thermostat error e294
When the furnace is undergoing self-testing, sometimes the error code E294 will be displayed on the home screen. In this case, follow the instructions in your user manual.
If you see Error Code E294 at any time during the Heating Controls self-test procedure, it will not change from this display when running the self-test again. If you receive an Error Code E294 during a Heating Controls self-test procedure, refer to the Troubleshooting section for assistance in correcting the problem.
To read about this error in detail, click on More Information.
To skip to the Problem and Resolution of Issues related to our products section without reading more information about Error Codes P0014 through P877
—
Furnace thermostat problems can be extremely frustrating. They are one of the most frequent causes of an error code, and when a dryer code is flashing, that only means a major system failure as well.
Because a furnace regulator controls the temperature in your house, among other things, a malfunctioning regulator can not only increase your utility bill but also make it unbearable to live in your own home. If you have been noticing that something has been going wrong with your unit lately and you’re seeing the furnace error e294 on the display, it may be time to contact a qualified HVAC contractor to find out what’s wrong with it and why it’s happening so frequently now.