Goodman furnace ignitor not glowing
Goodman is a brand of HVAC products and solutions used in residential and light commercial buildings. They sell more than 10,000 products globally.
If you have a Goodman furnace, you need to know what to do if the ignitor is not glowing. First, check to ensure the gas valve switch is on “pilot” mode or “normal.” If the pilot light flame has gone out, replace it with a new one. If that doesn’t work, check for wiring problems like loose connections.
In an emergency, the ignitor is usually the first thing to check.
In most cases, a faulty gas valve will not provide enough pressure to light the gas nozzle of a gas furnace. When this happens, there are a few things that can be checked to see if they have caused this fault.
The first thing to check is the ignitor on your goodman furnace. The ignitor in your goodman furnace should be glowing red when power is running through it. If not, then you may need to replace it. Be sure to turn off all power before doing so by turning off the power at the breaker box or circuit breaker.
The Goodman furnace is a popular model of gas furnace for home use. A common problem that users experience with this furnace is when the ignitor does not light and glow.
This may occur due to a faulty ignition switch, which can be replaced. The more common reason the ignitor will not glow is dirty or clogged burner tubes, which can be cleaned with a wire brush.
Users should try cleaning their burner tubes if they believe that this is the cause of their issue before replacing any parts or taking other steps.
“Inspections, Installations, Repairs & Maintenance”
