Table of Contents
Kenmore Furnace Codes: What You Need to Know
In general, getting an old, broken furnace to function again is not easy. If a thermostat breaks or a lightbulb burns out, you can usually find a replacement and make it work again without too much trouble. However, if the heat sensors fail or any other problem is more serious, it will take more than just replacing one small part. If you have a code-compliant home and are dealing with a broken furnace that cannot be fixed with simple replacements or temporary fixes, you will need to get it replaced entirely. This is where things can become complex depending on your specific setup and needs in your home. There are many different types of furnaces available today that meet very specific standards for efficiency and safety. So what should you know before making this decision? Here are some helpful tips and codes to keep in mind when getting a new furnace installed in your home.
Check Your Codes
Check with the local building codes before deciding upon a specific type of furnace. If the home were built or last remodelled before the 90s, you would likely need to replace your entire HVAC system to comply with current regulations. You may also need to check with your insurance provider to see if any specific codes work in your favour in a break-in or other major home issue that would require a furnace replacement. If you have a new furnace installed in a home built after the 90s, you are probably in the clear and can choose from a wide variety of options. If the current furnace is still in working order, you can also choose to replace parts or components such as the filter, thermostat, and other simple repairs to keep it running smoothly for longer.
Check the Age of Your Furnace
If you have an old, broken furnace in your home, you can probably replace it with a modern option. However, there is one very important detail you should keep in mind first: the furnace’s age. If a furnace is older than 15 years, it won’t be easy to get insurance coverage for installing a new furnace, which means you will have to pay the full cost out of pocket.
Know the Differences Between Code Compliant Options
There are different types of furnace options on the market, but only some of them will be code compliant for your specific home. They understood the key differences between the following options before deciding on a new furnace. – High-efficiency furnaces – These furnaces are the most common option for new furnace installations. They are typically around 90% efficient, meaning they will not waste 10% of the energy you supply them with. They also typically have lower sound ratings, making them great for quiet residential neighbourhoods. Condensing furnaces – These are high-efficiency furnaces that also include a ” condensation ” process. Condensing furnaces are typically around 98% efficient, making them one of the most efficient options. However, they also tend to be more expensive than standard high-efficiency furnaces. High-efficiency boilers are an option if you have a hot water system in your home. They are typically only found in colder temperatures or places where electricity is unreliable. They tend to be a cheaper option than normal high-efficiency furnaces.
Condenser and Non-Condenser Options
There are two main types of furnaces available today: condensing furnaces and non-condensing furnaces. Keeping the information above in mind, you can identify which option would be more code compliant for your specific home. However, it is important to note that there is a difference between these two types of options that are often misunderstood. – The condenser is a part of a high-efficiency furnace. A non-condensing furnace does not have a condenser and thus does not have the same energy efficiency as a condensing furnace. A non-condensing furnace can work fine in most cases, but they are not code-compliant if you have a newer home with strict energy-saving codes.
Determining Condenser Function in Condenser-Only Options
Some options on the market are labelled as “condenser-only,” which means that they are non-condensing furnaces with a built-in condenser. These options are a nice middle ground between standard non-condensing furnaces and high-efficiency condensing furnaces. They are typically more efficient than standard non-condensing furnaces but not as efficient as high-efficiency condensing furnaces. However, there is one major difference between these options and a normal condensing furnace.
Finding the Right Size Option for Your Home
You will need to find the right-sized furnace for your home, which can be tricky. Here are some helpful tips on finding the right size option for your home. – Know the square footage of your home – The first thing you need to know is the square footage of your home. Square footage is the measurement of the distance of all the walls in the home and can be found on the real estate listing for your home. The amount of square footage in your home will decide what size furnace you need. – Keep in mind the people in your home – You also want to keep in mind the people that live in your home. If you have a large family that consumes a lot of energy, you will need a larger furnace than a smaller family.
Conclusion
A furnace code is a set of standards that the furnace must meet to be installed and operated in a certain area. To comply with these standards, many things need to be considered before installing a new furnace, such as the age of the furnace, the type of furnace being installed, and the size of the furnace. When replacing an old furnace, it is important to know the codes that are relevant in your area and the specific requirements of your home. This will help you decide which type of furnace would be best for your home and make finding and installing a new furnace much easier.
