Lennox furnace error code 441
Lennox’s 441 error code can be triggered if the blower fan has stopped running.
Often, when a Lennox furnace stops running, it is because the blower fan has stopped working. If this is the case, then you need to replace your motor or contact Lennox for assistance.
The Lennox furnace error code 441 is a problem that occurs when the heater sensor is not working properly.
The 441 error means that the internal temperature sensor is either reading an incorrect level of temperature, or it’s not reading anything at all. In either case, this can cause a heating problem because the thermostat has no way of knowing the actual temperature in the room.
When a Lennox furnace error code 441 is detected, the furnace will not turn on.
If error code 441 is detected and there are no heat zones in operation, please call for service to avoid further damage to your unit.
This error code signifies a problem with the furnace’s gas valve, but other parts of the furnace might be affected as well.
The cause for this error code is usually a loose connection or improper installation of the gas control valve.
A loose connection could be due to faulty wiring or incorrect routing of the wires in your home’s wiring system.
Code 441 is a code that is typically related to the furnace. Code 441 indicates a problem with the temperature sensor.
If you get a code 441 when starting your furnace, then it means that your system has detected problems with the temperature sensor. The easiest way to fix this issue would be to check the wiring for any loose connections or broken wires, and then tighten them up again.
Lennox Furnace Error Code 441 is a high temperature limit error. This error code is caused by high exhaust gas temperatures.
When troubleshooting, check to see if the house is drafty, or if there are any other sources of out-of-the-ordinary heat in the home.
The thermocouple could be malfunctioning because it’s been exposed to extreme temperatures, which would need to be replaced.
If you’re still experiencing this issue after checking these symptoms, contact your local Lennox dealer for additional help with repair costs.
“Inspections, Installations, Repairs & Maintenance”