Payne furnace error code 33
The error code 33 is displayed on the face of Payne furnaces in a state of failure. The error code 33 implies that the climate controller has failed to reset after an error activates the furnace. It may also be displayed when there is a mechanical failure with any component in the furnace, including the blower, heat exchanger, or control system.
The diagnosis for this issue is to test for power, oil pressure, and water level on all components. If these levels are not tested for there could be a faulty component within your furnace.
A Payne furnace error code 33 is an error you may find with your home’s heating system. This error means there is a problem with one of the valves, gauges, or sensors.
Payne furnace error code 33 can also occur if there are problems with the timer or thermostat. Something needs to be adjusted in the system to stop taking so much temperature and cool the heaters properly again.
Payne furnace error code 33 is a common error code displayed by the thermostat of Payne furnaces. The code indicates that the limit switch has failed and the furnace has been set to off.
If you experience this error code, you will need to contact your local repair company to determine the cause of the failure and how it can be fixed.
