Viessmann boiler vitocrossal 300 error codes

The most common problem with the boiler is an overheating problem, which can be resolved by simply turning off the thermostat for a while. If you overfill the tank, it will fill up the sight glass and register a high water level when it should be reading low.

The boiler will turn off and display error codes if there is a power outage or problems with variable-speed drive induction motors. If these problems persist, contact a heating technician for more help.

There are many reasons why your Viessmann boiler vitocrossal 300 error codes:

– A faulty or dirty gas tube

– Dust, dirt and hair accumulating on the burners

– Air leaking around the burner valve or pipe connections

– The burner does not get enough air from the furnace blower

– Burner flame is too low or pointed in the wrong direction

This article will look at the viessmann boiler vitocrossal 300 error codes identified and reported by the users. It is to be noted that these codes apply to viessmann boilers only.

If you get this code while firing up your boiler, the first code signifies that there is no hot water in your tank. To resolve this issue, you need to switch off the boiler and switch it on for a second time and then see if the problem gets resolved. You need to call a professional for help if it does not solve the issue.

Another code that needs consideration is E1 which means that your heat exchanger has failed, but you can still use the unit without any problems as long as there is enough gas in it, like an oven or a stove burner.


“Inspections, Installations, Repairs & Maintenance”