York furnace code 6
The New York State Plumbing Codes are part of a set of model plumbing codes used by plumbing inspectors and designers in the United States.
The York furnace code 6 is a type of furnace that provides central heating to residential buildings. It is used in homes and buildings with a maximum area of 2,000 square feet.
The York furnace code 6 is a one-pipe steam heating system that operates under the following conditions:
– The boiler is fired exclusively from anthracite coal.
– It has a single pressure setting of 10 pounds per square inch.
It is used with an automatic reheater to supply steam to the hot and domestic water systems.
For this system to be installed, the house must have at least one return air duct that connects with both the furnace’s warm and cold air intake chambers. The system’s capacity can be increased by adding one or two more return air ducts (or connecting to two or three more bedrooms).
The York furnace code 6 is a gas fireplace designed for heating and cooling seasons. The gas burners have an electronic ignition system and a blower, which can provide heat during the winter season.
The York furnace code 6 has a remote control panel, which can be connected to the fireplace through wires. It also has an optional remote control system which allows the user to control the fireplace from its current location. The unit has a spark screen made of chromium with a low-emission design and a flame-out switch that shuts off the pilot light when it detects no embers left.