Bryant Furnace Code Solid Red Light – Tips to Fix

If you’re running your Bryant furnace and it’s giving off a solid red light, stop using it. You need to get it fixed ASAP because the red light means that there’s something seriously wrong with the unit. Read on to learn why this is happening and what you can do about it. Red lights on furnaces are not good news for any homeowner. There could be a variety of reasons why your furnace has given you this warning sign, but regardless of the reason, you need to address the issue sooner rather than later. Here we will go over some helpful tips regarding why your Bryant furnace code solid red light is showing up as well as how to fix it so you can use it again without worry of a potential fire or carbon monoxide leak.

What does a solid red light mean on a furnace?

A solid red light on your furnace means that something is not right with the unit. This could be because there is a clog or jam in the combustion chamber, the sensors are malfunctioning, the blower wheel is jammed, or the pressure switch has been tripped. It’s important to take note of what the lights on your furnace are telling you and to also keep in mind that the colors are not standardized between companies. So, what we say about a solid red light on a Bryant furnace could be different from what another company’s furnace would indicate with a solid red light. If your furnace is giving you a solid red light, it’s not a good sign. Whether it is your primary furnace or a secondary furnace, you will want to check the unit to make sure everything is running smoothly and nothing needs to be replaced. If you see a solid red light, then you should follow the advice in this article and get your furnace checked as soon as possible.

Why would my furnace be giving me a solid red light?

There are a few reasons why your furnace would show a solid red light. The first and most common issue is a clog or blockage of some sort in the combustion chamber, which would indicate a problem with the burners. If the burners are not receiving enough air, or if the fuel is not being distributed properly, then the burners will not be able to ignite and the furnace will not be able to produce any heat. This will cause it to shut down to avoid causing a fire or explosion. Another common reason why your furnace would be giving you a solid red light is if the sensors are malfunctioning. This is especially common in older furnaces where the sensors may be corroded or bent out of shape. If the sensors are not able to detect the right amount of heat coming from the furnace, they will automatically shut it down.

How to fix your Bryant Furnace Code Solid Red Light

If you’re dealing with a solid red light on your furnace, there are a few things you can do to try and get it to function normally. The first thing you want to do is make sure the furnace is unplugged before you attempt to do any cleaning or maintenance on it. Once it’s unplugged, you can use a soft brush to clean the sensors and combustion chamber. If the sensors are corroded, you can try to sand them down a little bit so they can function properly again. If the sensors and combustion chamber are clean but the furnace is still giving you a solid red light, you will want to check the pressure switch. Most furnaces have a safety switch that will automatically turn off the unit if it detects too much pressure. This can cause the furnace to shut down even if everything else is running smoothly.

Check the Carbon Monoxide and Gas Sensors

In addition to checking the sensors and the combustion chamber, you may also want to check the sensors that keep the furnace from creating carbon monoxide. If these sensors are faulty, the furnace may shut down because it’s trying to protect you and your family from a dangerous situation. If this is the issue, then you will want to replace the sensors as soon as possible so they can keep the furnace running smoothly. If the sensors are clean but the furnace is still giving you a solid red light, you will want to check the gas valve. The gas valve will be near the furnace and should have a few wires leading to it. If any of those wires are loose or broken, it will not allow the furnace to receive fuel and will shut the unit down.

Check the Combustion Chamber and Burner Orbs

Another thing you will want to check on your furnace is the burner orbs. The orbs are what ignite the fuel and cause the furnace to warm up and produce heat. If the orbs are bent or broken, they will not be able to ignite the fuel and the furnace will shut down due to a safety precaution. If the orbs are bent or broken, you will want to replace them as soon as possible so the furnace can function again. If the orbs are clean but the furnace is still giving you a solid red light, you will want to check the pilot. The furnace uses a pilot to ignite the burner orbs and produce heat. If the pilot is out, the furnace will not be able to produce any heat. You can light the pilot either by using a match or by using a lighter (be careful not to burn yourself!). If the pilot is clean but the furnace is still not working, you may want to call a professional to see what’s wrong with the unit.

Check the Blower Wheel and Ducting

Another thing you will want to check on your furnace is the blower wheel. The blower wheel is what distributes the heat throughout your house and makes sure you are getting the right amount of heat. If the blower wheel is bent or broken, it will not be able to distribute the heat and will shut down due to a safety precaution. If the blower wheel is bent or broken, you will want to replace it as soon as possible so the furnace can function again. If the blower wheel is clean but the furnace is still giving you a solid red light and not producing any heat, you will want to check the ducting. The ducting is what sends the heated air throughout your house. If the ducting is clogged or blocked, the furnace will not be able to send heated air throughout the house and will shut down as a safety precaution. If the ducting is clogged or blocked, you will want to clean it out as soon as possible so the furnace can function again.

Conclusion

Regardless of the reason, your furnace is giving you a solid red light, it’s important to address the issue as soon as possible. It’s also important to note that you should never try to fix anything on a gas furnace yourself if you are not experienced with it. You need to make sure that you hire a professional to come and look at your furnace if you don’t think you can fix the issue yourself. A properly working furnace is essential to keeping the people living in your home safe and comfortable. If your furnace is exhibiting any of the issues discussed above, you should get it checked out as soon as possible.