f Amana furnace error code

This article will discuss the F Amana furnace error code and how to resolve it.

F Amana furnace error code is a quite common problem. Here’s how it manifests itself:

The furnace blower continues to run but the gas valve does not open, the flame goes out, and the power light blinks.

There are a number of Amana furnace error codes that you may run across. This article will discuss some of the most common ones and what they mean.

1) F1-Fan error: The fan motor is not working the problem may be caused by issues with the fan itself, the motor or the wiring. If you have recently installed a new motor or capacitor, please check them for any problems before continuing troubleshooting.

2) F2-Circuit board failure: The circuit board in your furnace has failed and needs to be replaced.

3) F3-Temperature sensor failure: Your temperature sensor has stopped working and needs to be replaced.

4) F4-Control panel error: The control panel in your furnace has failed and needs to be replaced

We shouldn’t make assumptions and instead, we should look at the situation more objectively. F Amana furnace error code is a warning that points to something going wrong inside the unit such as an obstruction in the air filter.

F Amana furnace error code can be due to a number of possible reasons that vary from blocked or failed blower, faulty thermo-time switch, faulty sensor switch, low voltage power supply and so on. So when you see f Amana furnace error code don’t panic but rather use it as an indicator to know what needs to be fixed inside the unit.