I Amana furnace error code e77

If you are experiencing an “E77” error code, do not worry. There is a reset button on the furnace control panel that can be used to clear the error code.

To clear the E77 error code, please follow these steps:

1. Turn off the gas valve and electricity to your furnace.

2. Turn your furnace off, and wait 30 minutes for it to cool down completely, then turn it back on again.

3. Check your thermostat settings and make sure it is set to “heat”. If you have a programmable thermostat, make sure to set a heating cycle for at least 45 minutes with a settable starting temperature of 55 degrees Fahrenheit or higher and an ending temperature of 72 degrees Fahrenheit or lower. If you do not

The I Amana furnace error code e77 is a common problem with the furnace. The e77 error code is usually associated with the gas control valve. If you call Amana customer service, they will tell you to test and clean or replace the gas control valve.

This error is seen when the control board or a sensor in the control board needs to be replaced.

Error codes displayed on the display panel of the furnace can be difficult to interpret without a trained professional. If you’re unsure what might be wrong with your furnace, call a trained technician before attempting any repairs.