Viessmann boiler error e8
The E8 error is a trigger for the boiler to shut down. This is usually because of a cooling system failure, meaning the boiler cannot cool itself.
The most common cause of this error message is that there isn’t enough water in the boiler, and it’s overheating. It can also be caused by insufficient insulation around the pipe that vents out hot air, making it difficult for the water to cool down.
This error code is usually due to a communication problem between the boiler and the thermostat. If the problem persists, disconnect the boiler from the gas supply and wait 90 seconds before reconnecting it to the gas supply. This will reset the boiler.
It seems that your boiler is not getting enough gas to provide heat. To troubleshoot this, you might want to check if it’s possible that there is a leak in your pipe or if someone opened up your central heating valve without shutting it off first.
You may have encountered a boiler error code E8 while using your Viessmann boiler. This error code is typically caused by lost information on the boiler. But before we discuss how this error can be fixed, it’s important to know what the boiler does and how it works.
A boiler heats hot water for other household needs, such as heating and bathing. The process of heating water is called “heating.” A natural gas furnace or oil-fired furnace heats the hot water with a special burner that provides an open flame for combusting gas or oil to create heat, which then transfers and conducts heat to a pipe that will eventually reach the heat exchanger inside of your appliance.
“Inspections, Installations, Repairs & Maintenance”